Crane Rental – UAB "Profitable Business"

MAGNI EAB28RT

ptb.lt — Fri, 29 Mar 2024 10:32:08 +0000

MAGNI EAB28RT – 28.10 m working height – 26.10 m lifting height – 19.40 m maximum side extension – 250 kg platform load capacity – 2 maximum number of people on the platform Equipment – rotary JIB – steel platform 2.44 m long and 0.90 m wide – hydraulically rotated platform -90°/+90° – 360° dome rotation – continued – travel direction button operated with the thumb – proportional joystick control – two driving speeds – engine hour counter Power -electric lithium-ion batteries -battery capacity 80V/520Ah

Drive – 4X4 wheels – Non-marking tires

LGMG A14JE-LI

ptb.lt — Fri, 29 Mar 2024 10:30:55 +0000

LGMG A14JE-Li – 15,8 m working height – 13,8 m lifting height – 7.81 m maximum side extension – 230 kg platform load capacity – 2 maximum number of people on the platform Equipment – rotary JIB – steel platform 1.83 m long and 0.76 m wide – hydraulically rotated platform -90°/+90° – dome rotation – travel direction button operated with the thumb – proportional joystick control – two driving speeds – engine hour counter Power -electric lithium-ion batteries -battery capacity 2x 48V 280Ah

Drive – on two front wheels wheels – Non-marking tires

JLG TOUCAN 12E PLUS

ptb.lt — Fri, 29 Mar 2024 10:23:35 +0000

– 4.14 m telescopic Jib arm – overload detection system in the machine basket – unsecured 230 V line connected to the basket – automatic energy saving in idle state – on-board diagnostics – automatic rear wheel brakes – casings made of polyester – chain slack detection system – 3-stage machine tilt alarm and indicator light – handles for lifting and loading the machine with a crane – battery discharge indicator – machine operating hours counter – horn – safety harness attachment points – Zenon strobe light – manual system for emergency lowering of the platform – passive protection system against potholes

Power

– 48V battery – 260 A/hr – built-in charger - energy saving

Drive

- on two rear wheels – tires clamped. non-marking – tires designed for all types of surfaces

MANITOU 200 ATJ E

ptb.lt — Fri, 29 Mar 2024 10:18:14 +0000

– working altitude: 20.00 – side reach: 11.57 – lifting capacity: 230 kg – lift width: 2.32 – lift height: 2.46 – lift length: 8.34 – weight: 7100 kg

OPTIONS

– proportional control - 4-wheel drive – non-marking gray off-road wheels – diagnostic system – audible alarm and optical display when tilted too far

MANITOU 150 AETJ-C 3D

ptb.lt — Fri, 29 Mar 2024 10:15:24 +0000

– working altitude: 15.00 – side reach: 7.60 – lifting capacity: 200 kg – lift width: 1.50 – lift height: 1.97 – lift length: 6.05 – weight: 6 kg

MANITOU 120 AETJ-C 3D

ptb.lt — Fri, 29 Mar 2024 10:11:22 +0000

AB S-175-12 E2WD – 17.50 – working height – 500 kg – platform capacity – Steel platform with dimensions (3.04 x 1.18)

Equipment – Extendable balcony 1.20 – Heavy-duty steel safety barriers with opening gate – Proportional joystick with battery level indicator – Battery charging cable connection located at the rear of the machine – On-board diagnostic system – 230V line connected to the platform (not secured) – Handles for lifting with a crane – Emergency stop button on platform and bottom panel – Dynamic hydraulic brakes on the front hydromotors – Manual brake release – Manual valve for emergency lowering of the platform – Pull-out trays with machine components – Skids reducing ground clearance. preventing the machine from tipping over – Tilt level sensor with sound signal – Sound alarm – Horn – Hour meter - The warning light Cock – Certified weight system in the machine basket

Power – 48V DC 360Ah

Drive – Hydraulic. on two front wheels

wheels - Full. cast. gray non-marking

AB LIFT S175-12

ptb.lt — Fri, 29 Mar 2024 10:06:22 +0000

AB S-175-12 E2WD – 17.50 – working height – 500 kg – platform capacity – Steel platform with dimensions (3.04 x 1.18)

Power – 48V DC 360Ah

Drive – Hydraulic. on two front wheels

wheels - Full. cast. gray non-marking

JLG 2632R

ptb.lt — Fri, 29 Mar 2024 09:47:28 +0000

Standard equipment:

multi-disc brakes
hydraulic front axle
automatic loader
hydraulic pump 4.5 kW
hydraulic system 18 l
platform extension 0.86 m
foldable railings
removable machine control module
place for attaching seat belts
proportional joystick control
load detection system
4 6V 22 Ah batteries
on-board self-diagnostic tests
active pothole protection system
AC power cord attached to the platform
engine hour counter
lubrication-free scissor arm bushings
manual machine control
horn
pockets for lifting with a forklift
alarm and light

SINOBOOM GN2632 GTJZ0808

ptb.lt — Fri, 29 Mar 2024 09:43:32 +0000

GN-2632 (Sinoboom GTJZ0808) – 10,1 – working height – 250 kg – platform capacity – Steel platform with dimensions (2.25 x 81 cm) Equipment – Retractable balcony 90 cm (3 levels of extension) – Heavy-duty steel safety barriers with opening gate – DeltaTech control system – Proportional joystick with battery level indicator – Battery charging cable connection located at the rear of the machine – On-board diagnostic system – 230V line connected to the platform (not secured) – Handles for lifting with a crane – Emergency stop button on platform and bottom panel – Dynamic hydraulic brakes on the front hydromotors – Manual brake release – Manual valve for emergency lowering of the platform – Pull-out trays with machine components – Skids reducing the ground clearance, preventing the machine from tipping over – Tilt level sensor with sound signal – Sound alarm – Horn – Hour meter - The warning light Cock – Certified weight system in the machine basket – Connector for the Telematic system - preparation for work with the GPS module Power – 24 V DC – set of 4 lead-acid batteries 6V 225 Ah (GN-2632) – 24 V DC – set of 4 lead-acid batteries 6V 240 Ah (GN-2646) – Built-in 25 Amp universal charger (automatic charger) Drive – Hydraulic, on two front wheels wheels – Solid, cast, gray non-marking

SINOBOOM GN2046 – GTJZ 0612

ptb.lt — Fri, 29 Mar 2024 09:36:23 +0000

GN-2046 (Sinoboom GTJZ0612) – 8.3 – working height – 550 kg – platform capacity – Steel platform with dimensions (2,25 x 1,15) Equipment – Extendable balcony 90 cm – Heavy-duty steel safety barriers with opening gate – Handles for lifting with a crane – Skids reducing the ground clearance, preventing the machine from tipping over – Pull-out trays with machine components – DeltaTech control system – Proportional joystick with battery level indicator – Emergency stop button on platform and bottom panel – Tilt level sensor with sound signal – Battery charging cable connection located at the rear of the machine – 230V line connected to the platform (not secured) – Manual valve for emergency lowering of the platform – Dynamic hydraulic brakes on the front hydromotors – Sound alarm – Horn – Hour meter – Certified weight system in the machine basket - The warning light Cock Power – 24 V DC – set of 4 6V lead-acid batteries – Built-in universal 25Amp charger (automatic charger) Drive – Hydraulic, on two front wheels wheels – Full, cast, non-marking

SINOBOOM GN2032 – GTJZ0608

ptb.lt — Fri, 29 Mar 2024 09:30:55 +0000

GN-2032 (Sinoboom GTJZ0608) – 8.3 – working height – 380 kg – platform capacity – Steel platform with dimensions (2,25 x 81 cm) Equipment – Extendable balcony 90 cm – Heavy-duty steel safety barriers with opening gate – Handles for lifting with a crane – Skids reducing the ground clearance, preventing the machine from tipping over – Pull-out trays with machine components – DeltaTech control system – Proportional joystick with battery level indicator – Emergency stop button on platform and bottom panel – Tilt level sensor with sound signal – Battery charging cable connection located at the rear of the machine – 230V line connected to the platform (not secured) – Manual valve for emergency lowering of the platform – Dynamic hydraulic brakes on the front hydromotors – Sound alarm – Horn – Hour meter – Certified weight system in the machine basket - The warning light Cock Power – 24 V DC – set of 4 6V lead-acid batteries – Built-in universal 25Amp charger (automatic charger) Drive – Hydraulic, on two front wheels wheels – Full, cast, non-marking

GENIE GS2032

ptb.lt — Fri, 29 Mar 2024 09:26:57 +0000

GS 2032 – 7.90 – working height – 363 kg – platform capacity Equipment – Steel platform with dimensions (2.26 x 0,81 cm) – Extendable balcony 91 cm – Heavy-duty steel safety barriers with opening gate – Pull-out trays with machine components – Smart Link control system – Built-in diagnostic system – Handles for lifting with a crane – Proportional joystick with battery level indicator – Emergency stop button on platform and bottom panel – Tilt level sensor with sound signal – Protection against potholes – Battery charging cable connection located at the rear of the machine – 230V line connected to the platform (not secured) – Manual valve for emergency lowering of the platform – Dynamic hydraulic brakes on the front hydromotors – Manual brake release – Sound alarm – Horn – Hour meter – Certified weight system in the machine basket - The warning light Cock – Connector for the Telematic system - preparation for work with the GPS module Power – 24 V DC – set of 4 acid batteries 6V, 225 Ah – Built-in universal 20Amp charger (automatic charger) Drive – Hydraulic, on two front wheels wheels – Solid, cast, gray non-marking Supports – Automatically leveling supports (only in GS-3232 standard)

GENIE GS1932

ptb.lt — Fri, 29 Mar 2024 09:20:11 +0000

GS 1932 – 7.79 – working height – 227 kg – platform capacity Equipment – Steel platform with dimensions (1.63 x 74 cm) – Extendable balcony 91 cm – Heavy-duty steel safety barriers with opening gate – Handles for lifting with a crane – Skids reducing the ground clearance, preventing the machine from tipping over – Pull-out trays with machine components – Smart Link control system – diagnostic system – Proportional joystick with battery level indicator – Emergency stop button on platform and bottom panel – Tilt level sensor with sound signal – Battery charging cable connection located at the rear of the machine – 230V line connected to the platform (not secured) – Manual valve for emergency lowering of the platform – Dynamic hydraulic brakes on the front hydromotors – Sound alarm – Horn – Hour meter – Certified weight system in the machine basket - The warning light Cock – Connector for the Telematic system - preparation for work with the GPS module Power – 24 V DC – set of 4 6V lead-acid batteries – Built-in universal 20Amp charger (automatic charger) Drive – Hydraulic, on two front wheels wheels – Solid, cast, gray non-marking

OPTIONS

– Pneumatic line connected to the platform – Protection of the 230V line connected to the platform (plug, socket, residual curlease device, electrical measurements) – Biodegradable hydraulic oil – Lift travel alarm – Lift movement alarm – Maintenance-free gel batteries, the standard charger is designed to handle both types of batteries – Curlease cut-off module at too low temperature – Lift movement alarm package – GPS module providing information about location and performed operations

GENIE GS3246

ptb.lt — Fri, 29 Mar 2024 09:05:12 +0000

GS 3246 – 11.75 – working height – 318 kg – platform capacity Equipment – Steel platform with dimensions (2.26 x 1.15) – Retractable balcony 91 cm (3 levels of extension) – Heavy-duty steel safety barriers with opening gate – Smart Link control system – diagnostic system – Proportional joystick with battery level indicator – Battery charging cable connection located at the rear of the machine – On-board diagnostic system – 230V line connected to the platform (not secured) – Handles for lifting with a crane – Emergency stop button on platform and bottom panel – Dynamic hydraulic brakes on the front hydromotors – Manual brake release – Manual valve for emergency lowering of the platform – Pull-out trays with machine components – Skids reducing the ground clearance, preventing the machine from tipping over – Tilt level sensor with sound signal – Sound alarm – Horn – Hour meter - The warning light Cock – Certified weight system in the machine basket – Connector for the Telematic system - preparation for work with the GPS module Power – 24 V DC – set of 4 lead-acid batteries 6V 225 Ah – Built-in universal 20Amp charger (automatic charger) Drive – Hydraulic, on two front wheels wheels – Solid, cast, gray non-marking

OPTIONS

– Pneumatic line connected to the platform – Protection of the 230V line connected to the platform (plug, socket, residual curlease device, electrical measurements) – Biodegradable hydraulic oil – Lift travel alarm – Lift movement alarm – Maintenance-free gel batteries, the standard charger is designed to handle both types of batteries – Curlease cut-off module at too low temperature – GPS module providing information about location and performed operations